nixpkgs/pkgs/stdenv/generic/setup.sh

1057 lines
28 KiB
Bash
Raw Normal View History

set -eu
2014-10-10 11:50:25 +02:00
set -o pipefail
if (( "${NIX_DEBUG:-0}" >= 6 )); then
set -x
fi
2014-06-25 16:47:58 +02:00
: ${outputs:=out}
######################################################################
# Hook handling.
# Run all hooks with the specified name in the order in which they
# were added, stopping if any fails (returns a non-zero exit
# code). The hooks for <hookName> are the shell function or variable
# <hookName>, and the values of the shell array <hookName>Hooks.
runHook() {
local oldOpts="$(shopt -po nounset)"
set -u # May be called from elsewhere, so do `set -u`.
local hookName="$1"
shift
local hooksSlice="${hookName%Hook}Hooks[@]"
local hook
# Hack around old bash being bad and thinking empty arrays are
# undefined.
for hook in "_callImplicitHook 0 $hookName" ${!hooksSlice+"${!hooksSlice}"}; do
_eval "$hook" "$@"
set -u # To balance `_eval`
done
eval "${oldOpts}"
return 0
}
# Run all hooks with the specified name, until one succeeds (returns a
# zero exit code). If none succeed, return a non-zero exit code.
runOneHook() {
local oldOpts="$(shopt -po nounset)"
set -u # May be called from elsewhere, so do `set -u`.
local hookName="$1"
shift
local hooksSlice="${hookName%Hook}Hooks[@]"
local hook ret=1
# Hack around old bash like above
for hook in "_callImplicitHook 1 $hookName" ${!hooksSlice+"${!hooksSlice}"}; do
if _eval "$hook" "$@"; then
ret=0
break
fi
set -u # To balance `_eval`
done
eval "${oldOpts}"
return "$ret"
}
# Run the named hook, either by calling the function with that name or
# by evaluating the variable with that name. This allows convenient
# setting of hooks both from Nix expressions (as attributes /
# environment variables) and from shell scripts (as functions). If you
# want to allow multiple hooks, use runHook instead.
_callImplicitHook() {
set -u
local def="$1"
local hookName="$2"
case "$(type -t "$hookName")" in
(function|alias|builtin)
set +u
"$hookName";;
(file)
set +u
source "$hookName";;
(keyword) :;;
(*) if [ -z "${!hookName:-}" ]; then
return "$def";
else
set +u
eval "${!hookName}"
fi;;
esac
# `_eval` expects hook to need nounset disable and leave it
# disabled anyways, so Ok to to delegate. The alternative of a
# return trap is no good because it would affect nested returns.
}
# A function wrapper around eval that ensures that return inside
# hooks exits the hook, not the caller. Also will only pass args if
# command can take them
_eval() {
if [ "$(type -t "$1")" = function ]; then
set +u
"$@" # including args
else
set +u
eval "$1"
fi
# `run*Hook` reenables `set -u`
}
######################################################################
# Logging.
# Obsolete.
stopNest() { true; }
header() { echo "$1"; }
closeNest() { true; }
# Prints a command such that all word splits are unambiguous. We need
# to split the command in three parts because the middle format string
# will be, and must be, repeated for each argument. The first argument
# goes before the ':' and is just for convenience.
echoCmd() {
printf "%s:" "$1"
shift
printf ' %q' "$@"
echo
}
######################################################################
# Error handling.
exitHandler() {
exitCode="$?"
set +e
if [ -n "${showBuildStats:-}" ]; then
times > "$NIX_BUILD_TOP/.times"
local -a times=($(cat "$NIX_BUILD_TOP/.times"))
# Print the following statistics:
# - user time for the shell
# - system time for the shell
# - user time for all child processes
# - system time for all child processes
echo "build time elapsed: " "${times[@]}"
fi
2012-12-28 16:41:56 +01:00
if (( "$exitCode" != 0 )); then
runHook failureHook
2012-12-28 16:41:56 +01:00
# If the builder had a non-zero exit code and
# $succeedOnFailure is set, create the file
# $out/nix-support/failed to signal failure, and exit
# normally. Otherwise, return the original exit code.
if [ -n "${succeedOnFailure:-}" ]; then
echo "build failed with exit code $exitCode (ignored)"
mkdir -p "$out/nix-support"
printf "%s" "$exitCode" > "$out/nix-support/failed"
exit 0
fi
2012-12-28 16:41:56 +01:00
else
runHook exitHook
fi
2012-12-28 16:41:56 +01:00
exit "$exitCode"
}
trap "exitHandler" EXIT
######################################################################
# Helper functions.
addToSearchPathWithCustomDelimiter() {
local delimiter="$1"
local varName="$2"
local dir="$3"
if [ -d "$dir" ]; then
export "${varName}=${!varName:+${!varName}${delimiter}}${dir}"
fi
}
PATH_DELIMITER=':'
addToSearchPath() {
addToSearchPathWithCustomDelimiter "${PATH_DELIMITER}" "$@"
}
ensureDir() {
echo "warning: ensureDir is deprecated; use mkdir instead" >&2
local dir
for dir in "$@"; do
if ! [ -x "$dir" ]; then mkdir -p "$dir"; fi
done
}
2014-08-25 15:30:46 +02:00
# Add $1/lib* into rpaths.
# The function is used in multiple-outputs.sh hook,
# so it is defined here but tried after the hook.
_addRpathPrefix() {
if [ "${NIX_NO_SELF_RPATH:-0}" != 1 ]; then
2014-08-25 15:30:46 +02:00
export NIX_LDFLAGS="-rpath $1/lib $NIX_LDFLAGS"
if [ -n "${NIX_LIB64_IN_SELF_RPATH:-}" ]; then
2014-08-25 15:30:46 +02:00
export NIX_LDFLAGS="-rpath $1/lib64 $NIX_LDFLAGS"
fi
if [ -n "${NIX_LIB32_IN_SELF_RPATH:-}" ]; then
2014-08-25 15:30:46 +02:00
export NIX_LDFLAGS="-rpath $1/lib32 $NIX_LDFLAGS"
fi
fi
}
# Return success if the specified file is an ELF object.
isELF() {
local fn="$1"
local fd
local magic
exec {fd}< "$fn"
read -r -n 4 -u "$fd" magic
exec {fd}<&-
if [[ "$magic" =~ ELF ]]; then return 0; else return 1; fi
}
# Return success if the specified file is a script (i.e. starts with
# "#!").
isScript() {
local fn="$1"
local fd
local magic
if ! [ -x /bin/sh ]; then return 0; fi
exec {fd}< "$fn"
read -r -n 2 -u "$fd" magic
exec {fd}<&-
if [[ "$magic" =~ \#! ]]; then return 0; else return 1; fi
}
# printf unfortunately will print a trailing newline regardless
printLines() {
(( "$#" > 0 )) || return 0
printf '%s\n' "$@"
}
printWords() {
(( "$#" > 0 )) || return 0
printf '%s ' "$@"
}
######################################################################
# Initialisation.
# Set a fallback default value for SOURCE_DATE_EPOCH, used by some
# build tools to provide a deterministic substitute for the "current"
# time. Note that 1 = 1970-01-01 00:00:01. We don't use 0 because it
# confuses some applications.
export SOURCE_DATE_EPOCH
: ${SOURCE_DATE_EPOCH:=1}
# Wildcard expansions that don't match should expand to an empty list.
# This ensures that, for instance, "for i in *; do ...; done" does the
# right thing.
shopt -s nullglob
# Set up the initial path.
PATH=
for i in $initialPath; do
if [ "$i" = / ]; then i=; fi
addToSearchPath PATH "$i/bin"
done
if (( "${NIX_DEBUG:-0}" >= 1 )); then
echo "initial path: $PATH"
fi
# Check that the pre-hook initialised SHELL.
if [ -z "${SHELL:-}" ]; then echo "SHELL not set"; exit 1; fi
BASH="$SHELL"
export CONFIG_SHELL="$SHELL"
# Dummy implementation of the paxmark function. On Linux, this is
# overwritten by paxctl's setup hook.
paxmark() { true; }
# Execute the pre-hook.
if [ -z "${shell:-}" ]; then export shell="$SHELL"; fi
runHook preHook
# Allow the caller to augment buildInputs (it's not always possible to
# do this before the call to setup.sh, since the PATH is empty at that
# point; here we have a basic Unix environment).
runHook addInputsHook
# Recursively find all build inputs.
findInputs() {
local pkg="$1"; shift
local var="$1"; shift
local propagatedBuildInputsFiles=("$@")
# TODO(@Ericson2314): Restore using associative array once Darwin
# nix-shell doesn't use impure bash. This should replace the O(n)
# case with an O(1) hash map lookup, assuming bash is implemented
# well :D.
local varSlice="$var[*]"
# ${..-} to hack around old bash empty array problem
case "${!varSlice-}" in
*" $pkg "*) return 0 ;;
esac
unset -v varSlice
eval "$var"'+=("$pkg")'
if ! [ -e "$pkg" ]; then
echo "build input $pkg does not exist" >&2
exit 1
fi
local file
for file in "${propagatedBuildInputsFiles[@]}"; do
file="$pkg/nix-support/$file"
[[ -f "$file" ]] || continue
local pkgNext
for pkgNext in $(< "$file"); do
findInputs "$pkgNext" "$var" "${propagatedBuildInputsFiles[@]}"
done
done
}
# Add package to the future PATH and run setup hooks
activatePackage() {
local pkg="$1"
if [ -f "$pkg" ]; then
local oldOpts="$(shopt -po nounset)"
set +u
source "$pkg"
eval "$oldOpts"
fi
if [ -d "$pkg/bin" ]; then
addToSearchPath _PATH "$pkg/bin"
fi
if [ -f "$pkg/nix-support/setup-hook" ]; then
local oldOpts="$(shopt -po nounset)"
set +u
source "$pkg/nix-support/setup-hook"
eval "$oldOpts"
fi
}
declare -a nativePkgs crossPkgs
if [ -z "${crossConfig:-}" ]; then
# Not cross-compiling - both buildInputs (and variants like propagatedBuildInputs)
# are handled identically to nativeBuildInputs
for i in ${nativeBuildInputs:-} ${buildInputs:-} \
${defaultNativeBuildInputs:-} ${defaultBuildInputs:-} \
${propagatedNativeBuildInputs:-} ${propagatedBuildInputs:-}; do
findInputs "$i" nativePkgs propagated-native-build-inputs propagated-build-inputs
done
else
for i in ${nativeBuildInputs:-} ${defaultNativeBuildInputs:-} ${propagatedNativeBuildInputs:-}; do
findInputs "$i" nativePkgs propagated-native-build-inputs
done
for i in ${buildInputs:-} ${defaultBuildInputs:-} ${propagatedBuildInputs:-}; do
findInputs "$i" crossPkgs propagated-build-inputs
done
fi
for i in ${nativePkgs+"${nativePkgs[@]}"} ${crossPkgs+"${crossPkgs[@]}"}; do
activatePackage "$i"
done
# Set the relevant environment variables to point to the build inputs
# found above.
#
# These `depOffset`s tell the env hook what sort of dependency
# (ignoring propagatedness) is being passed to the env hook. In a real
# language, we'd append a closure with this information to the
# relevant env hook array, but bash doesn't have closures, so it's
# easier to just pass this in.
_addToNativeEnv() {
local pkg="$1"
if [[ -n "${crossConfig:-}" ]]; then
local -i depOffset=-1
else
local -i depOffset=0
fi
# Run the package-specific hooks set by the setup-hook scripts.
runHook envHook "$pkg"
}
# Old bash empty array hack
for i in ${nativePkgs+"${nativePkgs[@]}"}; do
_addToNativeEnv "$i"
done
_addToCrossEnv() {
local pkg="$1"
local -i depOffset=0
# Run the package-specific hooks set by the setup-hook scripts.
runHook crossEnvHook "$pkg"
}
# Old bash empty array hack
for i in ${crossPkgs+"${crossPkgs[@]}"}; do
_addToCrossEnv "$i"
done
_addRpathPrefix "$out"
# Set the TZ (timezone) environment variable, otherwise commands like
# `date' will complain (e.g., `Tue Mar 9 10:01:47 Local time zone must
# be set--see zic manual page 2004').
export TZ=UTC
# Set the prefix. This is generally $out, but it can be overriden,
# for instance if we just want to perform a test build/install to a
# temporary location and write a build report to $out.
if [ -z "${prefix:-}" ]; then
prefix="$out";
fi
if [ "${useTempPrefix:-}" = 1 ]; then
prefix="$NIX_BUILD_TOP/tmp_prefix";
fi
PATH="${_PATH-}${_PATH:+${PATH:+:}}$PATH"
if (( "${NIX_DEBUG:-0}" >= 1 )); then
echo "final path: $PATH"
fi
# Make GNU Make produce nested output.
export NIX_INDENT_MAKE=1
# Normalize the NIX_BUILD_CORES variable. The value might be 0, which
# means that we're supposed to try and auto-detect the number of
# available CPU cores at run-time.
if [ -z "${NIX_BUILD_CORES:-}" ]; then
NIX_BUILD_CORES="1"
elif [ "$NIX_BUILD_CORES" -le 0 ]; then
NIX_BUILD_CORES=$(nproc 2>/dev/null || true)
if expr >/dev/null 2>&1 "$NIX_BUILD_CORES" : "^[0-9][0-9]*$"; then
:
else
NIX_BUILD_CORES="1"
fi
fi
export NIX_BUILD_CORES
# Prevent OpenSSL-based applications from using certificates in
# /etc/ssl.
# Leave it in shells for convenience.
if [ -z "${SSL_CERT_FILE:-}" ] && [ -z "${IN_NIX_SHELL:-}" ]; then
export SSL_CERT_FILE=/no-cert-file.crt
fi
######################################################################
# Textual substitution functions.
substitute() {
local input="$1"
local output="$2"
shift 2
if [ ! -f "$input" ]; then
echo "substitute(): ERROR: file '$input' does not exist" >&2
return 1
fi
local content
# read returns non-0 on EOF, so we want read to fail
if IFS='' read -r -N 0 content < "$input"; then
echo "substitute(): ERROR: File \"$input\" has null bytes, won't process" >&2
return 1
fi
while (( "$#" )); do
case "$1" in
--replace)
pattern="$2"
replacement="$3"
shift 3
;;
--subst-var)
local varName="$2"
shift 2
# check if the used nix attribute name is a valid bash name
if ! [[ "$varName" =~ ^[a-zA-Z_][a-zA-Z0-9_]*$ ]]; then
echo "substitute(): ERROR: substitution variables must be valid Bash names, \"$varName\" isn't." >&2
return 1
fi
pattern="@$varName@"
replacement="${!varName}"
;;
--subst-var-by)
pattern="@$2@"
replacement="$3"
shift 3
;;
*)
echo "substitute(): ERROR: Invalid command line argument: $1" >&2
return 1
;;
esac
content="${content//"$pattern"/$replacement}"
done
if [ -e "$output" ]; then chmod +w "$output"; fi
printf "%s" "$content" > "$output"
}
substituteInPlace() {
local fileName="$1"
shift
substitute "$fileName" "$fileName" "$@"
}
# Substitute all environment variables that start with a lowercase character and
# are valid Bash names.
substituteAll() {
local input="$1"
local output="$2"
local -a args=()
for varName in $(awk 'BEGIN { for (v in ENVIRON) if (v ~ /^[a-z][a-zA-Z0-9_]*$/) print v }'); do
if (( "${NIX_DEBUG:-0}" >= 1 )); then
printf "@%s@ -> %q\n" "${varName}" "${!varName}"
fi
args+=("--subst-var" "$varName")
done
substitute "$input" "$output" "${args[@]}"
}
substituteAllInPlace() {
local fileName="$1"
shift
substituteAll "$fileName" "$fileName" "$@"
}
######################################################################
# What follows is the generic builder.
# This function is useful for debugging broken Nix builds. It dumps
# all environment variables to a file `env-vars' in the build
# directory. If the build fails and the `-K' option is used, you can
# then go to the build directory and source in `env-vars' to reproduce
# the environment used for building.
dumpVars() {
if [ "${noDumpEnvVars:-0}" != 1 ]; then
export > "$NIX_BUILD_TOP/env-vars" || true
fi
}
2016-10-12 22:29:38 +02:00
# Utility function: echo the base name of the given path, with the
# prefix `HASH-' removed, if present.
stripHash() {
local strippedName
# On separate line for `set -e`
strippedName="$(basename "$1")"
if echo "$strippedName" | grep -q '^[a-z0-9]\{32\}-'; then
echo "$strippedName" | cut -c34-
2016-10-12 22:29:38 +02:00
else
echo "$strippedName"
fi
}
unpackCmdHooks+=(_defaultUnpack)
_defaultUnpack() {
local fn="$1"
if [ -d "$fn" ]; then
# We can't preserve hardlinks because they may have been
# introduced by store optimization, which might break things
# in the build.
2016-10-12 22:29:38 +02:00
cp -pr --reflink=auto "$fn" "$(stripHash "$fn")"
else
case "$fn" in
*.tar.xz | *.tar.lzma)
# Don't rely on tar knowing about .xz.
xz -d < "$fn" | tar xf -
;;
*.tar | *.tar.* | *.tgz | *.tbz2)
# GNU tar can automatically select the decompression method
# (info "(tar) gzip").
tar xf "$fn"
;;
*)
return 1
;;
esac
fi
}
unpackFile() {
curSrc="$1"
header "unpacking source archive $curSrc" 3
if ! runOneHook unpackCmd "$curSrc"; then
echo "do not know how to unpack source archive $curSrc"
exit 1
fi
}
unpackPhase() {
runHook preUnpack
2012-12-28 16:41:56 +01:00
if [ -z "${srcs:-}" ]; then
if [ -z "${src:-}" ]; then
# shellcheck disable=SC2016
echo 'variable $src or $srcs should point to the source'
exit 1
fi
srcs="$src"
fi
# To determine the source directory created by unpacking the
# source archives, we record the contents of the current
# directory, then look below which directory got added. Yeah,
# it's rather hacky.
local dirsBefore=""
for i in *; do
if [ -d "$i" ]; then
dirsBefore="$dirsBefore $i "
fi
done
# Unpack all source archives.
for i in $srcs; do
unpackFile "$i"
done
# Find the source directory.
# set to empty if unset
: ${sourceRoot=}
if [ -n "${setSourceRoot:-}" ]; then
runOneHook setSourceRoot
elif [ -z "$sourceRoot" ]; then
for i in *; do
if [ -d "$i" ]; then
case $dirsBefore in
*\ $i\ *)
;;
*)
if [ -n "$sourceRoot" ]; then
echo "unpacker produced multiple directories"
exit 1
fi
sourceRoot="$i"
;;
esac
fi
done
fi
if [ -z "$sourceRoot" ]; then
echo "unpacker appears to have produced no directories"
exit 1
fi
echo "source root is $sourceRoot"
# By default, add write permission to the sources. This is often
# necessary when sources have been copied from other store
# locations.
if [ "${dontMakeSourcesWritable:-0}" != 1 ]; then
chmod -R u+w "$sourceRoot"
fi
runHook postUnpack
}
patchPhase() {
runHook prePatch
2012-12-28 16:41:56 +01:00
for i in ${patches:-}; do
header "applying patch $i" 3
local uncompress=cat
2014-10-09 21:41:56 +02:00
case "$i" in
*.gz)
uncompress="gzip -d"
;;
*.bz2)
uncompress="bzip2 -d"
;;
2013-08-07 15:45:21 +02:00
*.xz)
uncompress="xz -d"
;;
*.lzma)
uncompress="lzma -d"
;;
esac
# "2>&1" is a hack to make patch fail if the decompressor fails (nonexistent patch, etc.)
# shellcheck disable=SC2086
2014-10-09 21:41:56 +02:00
$uncompress < "$i" 2>&1 | patch ${patchFlags:--p1}
done
runHook postPatch
}
fixLibtool() {
sed -i -e 's^eval sys_lib_.*search_path=.*^^' "$1"
}
configurePhase() {
runHook preConfigure
# set to empty if unset
: ${configureScript=}
: ${configureFlags=}
if [[ -z "$configureScript" && -x ./configure ]]; then
configureScript=./configure
fi
if [ -z "${dontFixLibtool:-}" ]; then
local i
find . -iname "ltmain.sh" -print0 | while IFS='' read -r -d '' i; do
echo "fixing libtool script $i"
fixLibtool "$i"
done
fi
if [[ -z "${dontAddPrefix:-}" && -n "$prefix" ]]; then
configureFlags="${prefixKey:---prefix=}$prefix $configureFlags"
fi
# Add --disable-dependency-tracking to speed up some builds.
if [ -z "${dontAddDisableDepTrack:-}" ]; then
if [ -f "$configureScript" ] && grep -q dependency-tracking "$configureScript"; then
configureFlags="--disable-dependency-tracking $configureFlags"
fi
fi
# By default, disable static builds.
if [ -z "${dontDisableStatic:-}" ]; then
if [ -f "$configureScript" ] && grep -q enable-static "$configureScript"; then
configureFlags="--disable-static $configureFlags"
fi
fi
if [ -n "$configureScript" ]; then
# Old bash empty array hack
# shellcheck disable=SC2086
local flagsArray=(
$configureFlags ${configureFlagsArray+"${configureFlagsArray[@]}"}
)
echoCmd 'configure flags' "${flagsArray[@]}"
# shellcheck disable=SC2086
$configureScript "${flagsArray[@]}"
unset flagsArray
else
echo "no configure script, doing nothing"
fi
runHook postConfigure
}
buildPhase() {
runHook preBuild
# set to empty if unset
: ${makeFlags=}
if [[ -z "$makeFlags" && ! ( -n "${makefile:-}" || -e Makefile || -e makefile || -e GNUmakefile ) ]]; then
echo "no Makefile, doing nothing"
else
# See https://github.com/NixOS/nixpkgs/pull/1354#issuecomment-31260409
makeFlags="SHELL=$SHELL $makeFlags"
# Old bash empty array hack
# shellcheck disable=SC2086
local flagsArray=(
${enableParallelBuilding:+-j${NIX_BUILD_CORES} -l${NIX_BUILD_CORES}}
$makeFlags ${makeFlagsArray+"${makeFlagsArray[@]}"}
$buildFlags ${buildFlagsArray+"${buildFlagsArray[@]}"}
)
echoCmd 'build flags' "${flagsArray[@]}"
make ${makefile:+-f $makefile} "${flagsArray[@]}"
unset flagsArray
fi
runHook postBuild
}
checkPhase() {
runHook preCheck
# Old bash empty array hack
# shellcheck disable=SC2086
local flagsArray=(
${enableParallelBuilding:+-j${NIX_BUILD_CORES} -l${NIX_BUILD_CORES}}
$makeFlags ${makeFlagsArray+"${makeFlagsArray[@]}"}
${checkFlags:-VERBOSE=y} ${checkFlagsArray+"${checkFlagsArray[@]}"}
${checkTarget:-check}
)
echoCmd 'check flags' "${flagsArray[@]}"
make ${makefile:+-f $makefile} "${flagsArray[@]}"
unset flagsArray
runHook postCheck
}
installPhase() {
runHook preInstall
2014-08-25 15:30:46 +02:00
if [ -n "$prefix" ]; then
mkdir -p "$prefix"
fi
installTargets="${installTargets:-install}"
# Old bash empty array hack
# shellcheck disable=SC2086
local flagsArray=(
$installTargets
$makeFlags ${makeFlagsArray+"${makeFlagsArray[@]}"}
$installFlags ${installFlagsArray+"${installFlagsArray[@]}"}
)
echoCmd 'install flags' "${flagsArray[@]}"
make ${makefile:+-f $makefile} "${flagsArray[@]}"
unset flagsArray
runHook postInstall
}
2014-06-25 16:47:58 +02:00
# The fixup phase performs generic, package-independent stuff, like
# stripping binaries, running patchelf and setting
# propagated-build-inputs.
fixupPhase() {
# Make sure everything is writable so "strip" et al. work.
2014-06-25 16:47:58 +02:00
for output in $outputs; do
if [ -e "${!output}" ]; then chmod -R u+w "${!output}"; fi
2014-06-25 16:47:58 +02:00
done
runHook preFixup
2014-06-25 16:47:58 +02:00
# Apply fixup to each output.
local output
for output in $outputs; do
prefix="${!output}" runHook fixupOutput
2014-06-25 16:47:58 +02:00
done
# Propagate build inputs and setup hook into the development output.
if [ -n "${propagatedBuildInputs:-}" ]; then
mkdir -p "${!outputDev}/nix-support"
# shellcheck disable=SC2086
printWords $propagatedBuildInputs > "${!outputDev}/nix-support/propagated-build-inputs"
fi
2014-06-25 16:47:58 +02:00
if [ -n "${propagatedNativeBuildInputs:-}" ]; then
mkdir -p "${!outputDev}/nix-support"
# shellcheck disable=SC2086
printWords $propagatedNativeBuildInputs > "${!outputDev}/nix-support/propagated-native-build-inputs"
2014-06-25 16:47:58 +02:00
fi
if [ -n "${setupHook:-}" ]; then
mkdir -p "${!outputDev}/nix-support"
substituteAll "$setupHook" "${!outputDev}/nix-support/setup-hook"
2014-06-25 16:47:58 +02:00
fi
# Propagate user-env packages into the output with binaries, TODO?
if [ -n "${propagatedUserEnvPkgs:-}" ]; then
mkdir -p "${!outputBin}/nix-support"
# shellcheck disable=SC2086
printWords $propagatedUserEnvPkgs > "${!outputBin}/nix-support/propagated-user-env-packages"
2014-06-25 16:47:58 +02:00
fi
runHook postFixup
}
installCheckPhase() {
runHook preInstallCheck
# Old bash empty array hack
# shellcheck disable=SC2086
local flagsArray=(
${enableParallelBuilding:+-j${NIX_BUILD_CORES} -l${NIX_BUILD_CORES}}
$makeFlags ${makeFlagsArray+"${makeFlagsArray[@]}"}
$installCheckFlags ${installCheckFlagsArray+"${installCheckFlagsArray[@]}"}
${installCheckTarget:-installcheck}
)
echoCmd 'installcheck flags' "${flagsArray[@]}"
make ${makefile:+-f $makefile} "${flagsArray[@]}"
unset flagsArray
runHook postInstallCheck
}
distPhase() {
runHook preDist
# Old bash empty array hack
# shellcheck disable=SC2086
local flagsArray=(
$distFlags ${distFlagsArray+"${distFlagsArray[@]}"} ${distTarget:-dist}
)
echo 'dist flags: %q' "${flagsArray[@]}"
make ${makefile:+-f $makefile} "${flagsArray[@]}"
if [ "${dontCopyDist:-0}" != 1 ]; then
mkdir -p "$out/tarballs"
# Note: don't quote $tarballs, since we explicitly permit
# wildcards in there.
# shellcheck disable=SC2086
cp -pvd ${tarballs:-*.tar.gz} "$out/tarballs"
fi
runHook postDist
}
showPhaseHeader() {
local phase="$1"
case "$phase" in
unpackPhase) header "unpacking sources";;
patchPhase) header "patching sources";;
configurePhase) header "configuring";;
buildPhase) header "building";;
checkPhase) header "running tests";;
installPhase) header "installing";;
fixupPhase) header "post-installation fixup";;
installCheckPhase) header "running install tests";;
*) header "$phase";;
esac
}
genericBuild() {
if [ -f "${buildCommandPath:-}" ]; then
local oldOpts="$(shopt -po nounset)"
set +u
source "$buildCommandPath"
eval "$oldOpts"
return
fi
if [ -n "${buildCommand:-}" ]; then
local oldOpts="$(shopt -po nounset)"
set +u
eval "$buildCommand"
eval "$oldOpts"
return
fi
if [ -z "${phases:-}" ]; then
phases="${prePhases:-} unpackPhase patchPhase ${preConfigurePhases:-} \
configurePhase ${preBuildPhases:-} buildPhase checkPhase \
${preInstallPhases:-} installPhase ${preFixupPhases:-} fixupPhase installCheckPhase \
${preDistPhases:-} distPhase ${postPhases:-}";
fi
for curPhase in $phases; do
if [[ "$curPhase" = buildPhase && -n "${dontBuild:-}" ]]; then continue; fi
if [[ "$curPhase" = checkPhase && -z "${doCheck:-}" ]]; then continue; fi
if [[ "$curPhase" = installPhase && -n "${dontInstall:-}" ]]; then continue; fi
if [[ "$curPhase" = fixupPhase && -n "${dontFixup:-}" ]]; then continue; fi
if [[ "$curPhase" = installCheckPhase && -z "${doInstallCheck:-}" ]]; then continue; fi
if [[ "$curPhase" = distPhase && -z "${doDist:-}" ]]; then continue; fi
if [[ -n $NIX_LOG_FD ]]; then
echo "@nix { \"action\": \"setPhase\", \"phase\": \"$curPhase\" }" >&$NIX_LOG_FD
fi
showPhaseHeader "$curPhase"
dumpVars
2012-12-28 16:41:56 +01:00
# Evaluate the variable named $curPhase if it exists, otherwise the
# function named $curPhase.
local oldOpts="$(shopt -po nounset)"
set +u
eval "${!curPhase:-$curPhase}"
eval "$oldOpts"
if [ "$curPhase" = unpackPhase ]; then
cd "${sourceRoot:-.}"
fi
done
}
2014-01-07 09:48:23 +01:00
# Execute the post-hooks.
runHook postHook
# Execute the global user hook (defined through the Nixpkgs
# configuration option stdenv.userHook). This can be used to set
# global compiler optimisation flags, for instance.
runHook userHook
dumpVars
# Disable nounset for nix-shell.
set +u