Using a simple algorithm, convert the references to a path in to a
sorted list of dependent paths based on how often they're referenced
and how deep in the tree they live. Equally-"popular" paths are then
sorted by name.
The existing writeReferencesToFile prints the paths in a simple
ascii-based sorting of the paths.
Sorting the paths by graph improves the chances that the difference
between two builds appear near the end of the list, instead of near
the beginning. This makes a difference for Nix builds which export a
closure for another program to consume, if that program implements its
own level of binary diffing.
For an example, Docker Images. If each store path is a separate layer
then Docker Images can be very efficiently transfered between systems,
and we get very good cache reuse between images built with the same
version of Nixpkgs. However, since Docker only reliably supports a
small number of layers (42) it is important to pick the individual
layers carefully. By storing very popular store paths in the first 40
layers, we improve the chances that the next Docker image will share
many of those layers.*
Given the dependency tree:
A - B - C - D -\
\ \ \ \
\ \ \ \
\ \ - E ---- F
\- G
Nodes which have multiple references are duplicated:
A - B - C - D - F
\ \ \
\ \ \- E - F
\ \
\ \- E - F
\
\- G
Each leaf node is now replaced by a counter defaulted to 1:
A - B - C - D - (F:1)
\ \ \
\ \ \- E - (F:1)
\ \
\ \- E - (F:1)
\
\- (G:1)
Then each leaf counter is merged with its parent node, replacing the
parent node with a counter of 1, and each existing counter being
incremented by 1. That is to say `- D - (F:1)` becomes `- (D:1, F:2)`:
A - B - C - (D:1, F:2)
\ \ \
\ \ \- (E:1, F:2)
\ \
\ \- (E:1, F:2)
\
\- (G:1)
Then each leaf counter is merged with its parent node again, merging
any counters, then incrementing each:
A - B - (C:1, D:2, E:2, F:5)
\ \
\ \- (E:1, F:2)
\
\- (G:1)
And again:
A - (B:1, C:2, D:3, E:4, F:8)
\
\- (G:1)
And again:
(A:1, B:2, C:3, D:4, E:5, F:9, G:2)
and then paths have the following "popularity":
A 1
B 2
C 3
D 4
E 5
F 9
G 2
and the popularity contest would result in the paths being printed as:
F
E
D
C
B
G
A
* Note: People who have used a Dockerfile before assume Docker's
Layers are inherently ordered. However, this is not true -- Docker
layers are content-addressable and are not explicitly layered until
they are composed in to an Image.
This causes problems for packages built using a bootstrap stdenv,
resulting in references to /bin/sh or even bootstrap-tools. The darwin
stdenv is much stricter about what requisites/references are allowed but
using /bin/sh on linux is also undesirable.
eg. https://hydra.nixos.org/build/81754896
$ nix-build -A xz
$ head -n1 result-bin/bin/xzdiff
#!/nix/store/yvc7kmw98kq547bnqn1afgyxm8mxdwhp-bootstrap-tools/bin/sh
This reverts commit f06942327a.
This reverts commit f777d2b719.
cc #34409
This breaks evaluation of the tested job:
attribute 'diskInterface' missing, at /nix/store/5k9kk52bv6zsvsyyvpxhm8xmwyn2yjvx-source/pkgs/build-support/vm/default.nix:316:24
This includes the initialy commit was done by @Mic92 plus a few fixes
from my side. So essentially this avoids patching statically linked
executables and also speeds up searching for ELF files altogether.
I've tested this by comparing the outputs of all the derivations which
make use of this hook using the following Nix expression:
let
getPackagesForRev = rev: with import (builtins.fetchGit {
url = ./.;
inherit rev;
}) { config.allowUnfree = true; }; [
cups-kyodialog3 elasticsearch franz gurobi javacard-devkit
masterpdfeditor maxx oracle-instantclient powershell reaper
teamviewer unixODBCDrivers.msodbcsql17 virtlyst wavebox zoom-us
];
pkgs = import <nixpkgs> {};
baseRev = "ef764eb0d8314b81a012dae04642b4766199956d";
in pkgs.runCommand "diff-contents" {
chset = pkgs.lib.zipListsWith (old: new: pkgs.runCommand "diff" {
inherit old new;
nativeBuildInputs = [ pkgs.nukeReferences ];
} ''
mkdir -p "''${NIX_STORE#/}"
cp --no-preserve=all -r "$old" "''${NIX_STORE#/}"
cp --no-preserve=all -r "$new" "''${NIX_STORE#/}"
find "''${old#/}" "''${new#/}" \
\( -type f -exec nuke-refs {} + \) -o \( -type l -delete \)
mkdir "$out"
echo "$old" > "$out/old-path"
echo "$new" > "$out/new-path"
diff -Nur "''${old#/}" "''${new#/}" > "$out/diff" || :
'') (getPackagesForRev baseRev) (getPackagesForRev "");
} ''
err=0
for c in $chset; do
if [ -s "$c/diff" ]; then
echo "$(< "$c/old-path") -> $(< "$c/new-path")" \
"differs, report: $c/diff" >&2
err=1
fi
done
[ $err -eq 0 ] && touch "$out"
''
With these changes there is only one derivation which has altered
contents, which is "franz". However the reason why it has differing
contents is not directly because of the autoPatchelfHook changes, but
because the "env-vars" file from the builder is in
"$out/opt/franz/env-vars" (Cc: @gnidorah) and we now have different
contents for NIX_CFLAGS_COMPILE and other environment variables.
I also tested this against a random static binary and the hook no longer
tries to patch it.
Merges: #47222
The "maxx" package recursively runs isExecutable on a bunch of files and
since the change to use "readelf" instead of "file" a lot of errors like
this one are printed during build:
readelf: Error: Not an ELF file - it has the wrong magic bytes at the
start
While the isExecutable was never meant to be used outside of the
autoPatchelfHook, it's still a good idea to silence the errors because
whenever readelf fails, it clearly indicates that the file in question
is not a valid ELF file.
Signed-off-by: aszlig <aszlig@nix.build>
If the ELF file is not an executable, we do not get a PT_INTERP section,
because after all, it's a *shared* library.
So instead of checking for PT_INTERP (to avoid statically linked
executables) for all ELF files, we add another check to see if it's an
executable and *only* skip it when it is and there's no PT_INTERP.
Signed-off-by: aszlig <aszlig@nix.build>
The `overrideScope` bound by `makeScope` (via special `callPackage`)
took an override in the form `super: self { … }`. But this is
dangerously close to the `self: super { … }` form used by *everything*
else, even other definitions of `overrideScope`! Since that
implementation did not even share any code either until I changed it
recently in 3cf43547f4, this inconsistency
is almost certainly an oversight and not intentional.
Unfortunately, just as the inconstency is hard to debug if one just
assumes the conventional order, any sudden fix would break existing
overrides in the same hard-to-debug way. So instead of changing the
definition a new `overrideScope'` with the conventional order is added,
and old `overrideScope` deprecated with a warning saying to use
`overrideScope'` instead. That will hopefully get people to stop using
`overrideScope`, freeing our hand to change or remove it in the future.
02c09e0171 (NixOS/nixpkgs#44558) was reverted in
c981787db9 but, as it turns out, it fixed an issue
I didn't know about at the time: the values of `propagateDoc` options were
(and now again are) inconsistent with the underlying things those wrappers wrap
(see NixOS/nixpkgs#46119), which was (and now is) likely to produce more instances
of NixOS/nixpkgs#43547, if not now, then eventually as stdenv changes.
This patch (which is a simplified version of the original reverted patch) is the
simplest solution to this whole thing: it forces wrappers to directly inspect the
outputs of the things they are wrapping instead of making stdenv guess the correct
values.
Because dates are an impurity, by default buildImage will use a static
date of one second past the UNIX Epoch. This can be a bit frustrating
when listing docker images in the CLI:
$ docker image list
REPOSITORY TAG IMAGE ID CREATED SIZE
hello latest 08c791c7846e 48 years ago 25.2MB
If you want to trade the purity for a better user experience, you can
set created to now.
pkgs.dockerTools.buildImage {
name = "hello";
tag = "latest";
created = "now";
contents = pkgs.hello;
config.Cmd = [ "/bin/hello" ];
}
and now the Docker CLI will display a reasonable date and sort the
images as expected:
$ docker image list
REPOSITORY TAG IMAGE ID CREATED SIZE
hello latest de2bf4786de6 About a minute ago 25.2MB
This commit adds test based on real-world crates (brotli).
There were a few more edge cases that were missing beforehand. Also it
turned out that we can get rid of the `finalBins` list since that will
now be handled during runtime.
The build expression got quiet large over time and to make it a bit
easier to grasp the different scripts involved in the build are now
separated from the nix file.
Cargo has a few odd (old) ways of picking source files if the `bin.path`
attribute isn't given in the Cargo.toml. This commit adds support for
some of those. The previous behaviour always defaulted to `src/main.rs`
which was not always the right choice.
Since there is look-ahead into the unpacked sources before running the
actual builder the path selection logic has to be embedded within the
build script.
`buildRustCrate` currently supports two ways of running building
binaries when processing a crate:
- Explicit definition of all the binaries (& optionally the paths to
their respective `main.rs`) and,
- if not binary was explictly configured all files matching the patterns
`src/main.rs`, `src/bin/*.rs`.
When the explicit list is given without path information paths are now
being picked from a list of candidates. The first match wins. The order
is the same as within the cargo compatibility code.
If the crate does not provide any libraries the path `src/{bin_name}.rs`
is also considered.
All underscores within the binary names are translated into dashes (`-`)
before the lookups are made. This seems to be a common convention.
Previously the Release.xz URL would show up with a new hash whenever
debian releases an update. By using archive.org we should have a stable
source for those. I wasn't able to find the equivalent in the debian
world. Maybe they don't keep all the different Release files around..
By setting useRealVendorConfig explicitly to true, the actual (slightly
modified) config generated by cargo-vendor is used.
This solves a problem, where the static vendor config in
pkgs/build-support/rust/default.nix would not sufficiently replace all
crates Cargo is looking for.
As useRealVendorConfig (and writeVendorConfig in fetchcargo) default to
false, there should be no breakage in existing cargoSha256 hashes.
Nethertheless, imho using this new feature should become standard. A
possible deprecation path could be:
- introduce this patch
- set useRealVendorConfig explicitly to false whereever cargoSha256 is
set but migration is not wanted yet.
- after some time, let writeVendorConfig default to true
- when useRealVendorConfig is true everywhere cargoSha256 is set and
enough time is passed, `assert cargoVendorDir == null ->
useRealVendorConfig;`, remove old behaviour
- after some time, remove all appearences of useRealVendorConfig and the
parameter itself
Introduce a `skawarePackages.buildPackage` function that contains the
common setup, removing a lot of duplication.
In particular, we require that the build directory has to be empty
after the `fixupPhase`, to make sure every relevant file is moved to
the outputs.
A next step would be to deduplicate the `configureFlags` attributes
and only require a `skawareInputs` field.
There's no reason `linkFarm` can't be used for symlinks in
subdirectories, except that currently it doesn't ensure the directory
of the link exists. This backwards-compatible change expands the utility
of the function.
This hopefully makes patchShebangs respect cross compilation. It
introduces the concept of the HOST_PATH. Nothing is ever executed on
it but instead used as a way to get the proper path using ‘command
-v’. Needs more testing.
/cc @ericson2314 @dtzwill
Fixes#33956Fixes#21138
* substitute(): --subst-var was silently coercing to "" if the variable does not exist.
* libffi: simplify using `checkInputs`
* pythonPackges.hypothesis, pythonPackages.pytest: simpify dependency cycle fix
* utillinux: 2.32 -> 2.32.1
https://lkml.org/lkml/2018/7/16/532
* busybox: 1.29.0 -> 1.29.1
* bind: 9.12.1-P2 -> 9.12.2
https://ftp.isc.org/isc/bind9/9.12.2/RELEASE-NOTES-bind-9.12.2.html
* curl: 7.60.0 -> 7.61.0
* gvfs: make tests run, but disable
* ilmbase: disable tests on i686. Spooky!
* mdds: fix tests
* git: disable checks as tests are run in installcheck
* ruby: disable tests
* libcommuni: disable checks as tests are run in installcheck
* librdf: make tests run, but disable
* neon, neon_0_29: make tests run, but disable
* pciutils: 3.6.0 -> 3.6.1
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools. This update was made based on information from https://repology.org/metapackage/pciutils/versions.
* mesa: more include fixes
mostly from void-linux (thanks!)
* npth: 1.5 -> 1.6
minor bump
* boost167: Add lockfree next_prior patch
* stdenv: cleanup darwin bootstrapping
Also gets rid of the full python and some of it's dependencies in the
stdenv build closure.
* Revert "pciutils: use standardized equivalent for canonicalize_file_name"
This reverts commit f8db20fb3a.
Patching should no longer be needed with 3.6.1.
* binutils-wrapper: Try to avoid adding unnecessary -L flags
(cherry picked from commit f3758258b8895508475caf83e92bfb236a27ceb9)
Signed-off-by: Domen Kožar <domen@dev.si>
* libffi: don't check on darwin
libffi usages in stdenv broken darwin. We need to disable doCheck for that case.
* "rm $out/share/icons/hicolor/icon-theme.cache" -> hicolor-icon-theme setup-hook
* python.pkgs.pytest: setupHook to prevent creation of .pytest-cache folder, fixes#40273
When `py.test` was run with a folder as argument, it would not only
search for tests in that folder, but also create a .pytest-cache folder.
Not only is this state we don't want, but it was also causing
collisions.
* parity-ui: fix after merge
* python.pkgs.pytest-flake8: disable test, fix build
* Revert "meson: 0.46.1 -> 0.47.0"
With meson 0.47.0 (or 0.47.1, or git)
things are very wrong re:rpath handling
resulting in at best missing libs but
even corrupt binaries :(.
When we run patchelf it masks the problem
by removing obviously busted paths.
Which is probably why this wasn't noticed immediately.
Unfortunately the binary already
has a long series of paths scribbled
in a space intended for a much smaller string;
in my testing it was something like
lengths were 67 with 300+ written to it.
I think we've reported the relevant issues upstream,
but unfortunately it appears our patches
are what introduces the overwrite/corruption
(by no longer being correct in what they assume)
This doesn't look so bad to fix but it's
not something I can spend more time on
at the moment.
--
Interestingly the overwritten string data
(because it is scribbled past the bounds)
remains in the binary and is why we're suddenly
seeing unexpected references in various builds
-- notably this is is the reason we're
seeing the "extra-utils" breakage
that entirely crippled NixOS on master
(and probably on staging before?).
Fixes#43650.
This reverts commit 305ac4dade.
(cherry picked from commit 273d68eff8f7b6cd4ebed3718e5078a0f43cb55d)
Signed-off-by: Domen Kožar <domen@dev.si>
package-build expects the recipe file name to match the Emacs package
name. `melpaBuild` takes an extra argument `ename` for the Emacs package
name (default: `pname`, the Nix package name) which is used to name the recipe
file.
Fixes: #43893
See also: #43609
This makes the command ‘nix-env -qa -f. --arg config '{skipAliases =
true;}'’ work in Nixpkgs.
Misc...
- qtikz: use libsForQt5.callPackage
This ensures we get the right poppler.
- rewrites:
docbook5_xsl -> docbook_xsl_ns
docbook_xml_xslt -> docbook_xsl
diffpdf: fixup
With the recent update of BusyBox to version 1.29.0 in
d6aa506e3b there is now a new dependency
on libresolv.
This now throws a runtime error when executing ash, eg. whenever we do
something like this:
nix-build -E 'with import ./. {}; vmTools.runInLinuxVM hello'
The resulting error will be:
.../ash: error while loading shared libraries: libresolv.so.2: cannot
open shared object file: No such file or directory
I tried to override BusyBox with enableStatic, but that still requires
parts of glibc:
Static linking against glibc, can't use --gc-sections
Trying libraries: crypt m resolv
Library crypt is not needed, excluding it
Library m is needed, can't exclude it (yet)
Library resolv is needed, can't exclude it (yet)
Library m is needed, can't exclude it (yet)
Library resolv is needed, can't exclude it (yet)
Final link with: m resolv
In the long term maybe switching to a more minimal C library such as
musl would make more sense, but for now I just added libresolv.so to the
initrd which fixes the runtime error.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @edolstra, @rbvermaa
Signed-off-by: aszlig <aszlig@nix.build>
