Makes any programming errors more likely to show up early.
Non-obvious changes because of this:
- Ignore the `evalConfig` result in `reportFailure`; we're not checking
it at that point.
- Pre-increment `$fail` and `$pass` to make sure the arithmetic doesn't
result in a zero, which would result in a non-zero exit code for the
expression.
mkDerivedConfig : Option a -> (a -> Definition b) -> Definition b
Create config definitions with the same priority as the definition of another option.
This should be used for option definitions where one option sets the value of another as a convenience.
For instance a config file could be set with a `text` or `source` option, where text translates to a `source`
value using `mkDerivedConfig options.text (pkgs.writeText "filename.conf")`.
It takes care of setting the right priority using `mkOverride`.
recursiveUpdate does not produce an attrset until it has evaluated
both its arguments to weak head normal form.
nix-repl> lib.recursiveUpdate (throw "a") (throw "b")
error: b
nix-repl> lib.recursiveUpdate (throw "a") {}
error: a
The current implementation of `mutuallyExclusive` builds a new list with
length subtracted by one on every recursive call which is expensive. When
b is empty, the function still traverses a in its entirety before returning
a result.
The new implementation uses `any` to check if each element of list b is in
list a using `elem`. This maintains short circuiting when list a or b is empty
and has a worst case time complexity of O(nm).
the fix to extendDerivation in #140051 unwittingly worsened eval performance by
quite a bit. set elements alone needed over 1GB extra after the change, which
seems disproportionate to how small it was. if we flip the logic used to
determine which outputs to install around and keep a "this one exactly" flag in
the specific outputs instead of a "all of them" in the root we can avoid most
of that cost.
if extendDerivation is called on something that already had extendDerivation
called on it (eg a mkDerivation result) the second call will set
outputUnspecified=true on every output by way of propagating attributes of the
full derivation to the individual outputs. this in turn causes buildEnv--and
thus nix-shell and environment.systemPackages--to install every output of such a
derivation even when only a specific output was requested, which renders the
point of multiple outputs moot. this happens in python modules (see #139756),
though it seems that tcl and possibly others should also be affected.
PowerNV was looking for a nonexisting zImage file.
Remove unnecessary .file / .installTarget.
Also add config options needed for default minimal
NixOS config and QEMU VirtIO/VirtFS devices.
I'm working on a project that involves running a virtual machine
monitor program, which creates a control socket in the project
directory (because it doesn't make sense to put it anywhere else).
This obviously isn't part of the source of my program, so I think
cleanSource should filter it out.
Consider a derivation a value to be serialized.
nix-repl> lib.generators.toGitINI { hello = { drv = pkgs.hello; }; }
error: evaluation aborted with the following error message: 'generators.mkValueStringDefault: attrsets not supported: <derivation /nix/store/533q15q67sl6dl0272dyi7m7w5pwkkjh-hello-2.10.drv>'
Fixes#137390
The current implementation of the concatStringsSep fallback references
concatStrings whcih is just a partial application of concatStringsSep,
forming a circular dependency. Although this will almost never be
encountered as (assuming the user does not explicitly trigger it):
1. the or operator will short circuit both in lazy and strict
evaluation
2. this can only occur in Nix versions prior to 1.10
which is not compatible with various nix operations as of 2.3.15
However it is still important if scopedImport is used or the builtins
have been overwritten. lib.foldl' is used instead of builtins.foldl'
as the foldl' primops was introduced in the same release as concatStringsSep.
As suggested in #131205.
Now it's possible to pretty-print a value with `lib.generators` like
this:
with lib.generators;
toPretty { }
(withRecursion { depthLimit = 10; } /* arbitrarily complex value */)
Also, this can be used for any other pretty-printer now if needed.
The message I originally implemented here was to catch a mixup of
`config' and `options' in a `types.submodule'[1]. However it looks
rather weird for a wrongly declared top-level option.
So I decided to throw
error: The option `foo' does not exist. Definition values:
- In `<unknown-file>':
{
bar = {
_type = "option";
type = {
_type = "option-type";
...
It seems as you're trying to declare an option by placing it into `config' rather than `options'!
for an expression like
with import ./lib;
evalModules {
modules = [
{
foo.bar = mkOption {
type = types.str;
};
}
];
}
[1] fa30c9abed
When having a bogus declaration such as
{ lib, ... }:
{
foo.bar = mkOption {
type = types.str;
};
}
the evaluation will terminate with a not-so helpful
error: stack overflow (possible infinite recursion)
To make sure a useful error is still provided, I added a `depthLimit` of
`10` which should be perfectly sufficient to `toPretty` when it's used
in an error-case for `showDefs`.
When having e.g. recursive attr-set, it cannot be printed which is
solved by Nix itself like this:
$ nix-instantiate --eval -E 'let a.b = 1; a.c = a; in builtins.trace a 1'
trace: { b = 1; c = <CYCLE>; }
1
However, `generators.toPretty` tries to evaluate something until it's
done which can result in a spurious `stack-overflow`-error:
$ nix-instantiate --eval -E 'with import <nixpkgs/lib>; generators.toPretty { } (mkOption { type = types.str; })'
error: stack overflow (possible infinite recursion)
Those attr-sets are in fact rather common, one example is shown above, a
`types.<type>`-declaration is such an example. By adding an optional
`depthLimit`-argument, `toPretty` will stop evaluating as soon as the
limit is reached:
$ nix-instantiate --eval -E 'with import ./Projects/nixpkgs-update-int/lib; generators.toPretty { depthLimit = 2; } (mkOption { type = types.str; })' |xargs -0 echo -e
"{
_type = \"option\";
type = {
_type = \"option-type\";
check = <function>;
deprecationMessage = null;
description = \"string\";
emptyValue = { };
functor = {
binOp = <unevaluated>;
name = <unevaluated>;
payload = <unevaluated>;
type = <unevaluated>;
wrapped = <unevaluated>;
};
getSubModules = null;
getSubOptions = <function>;
merge = <function>;
name = \"str\";
nestedTypes = { };
substSubModules = <function>;
typeMerge = <function>;
};
}"
Optionally, it's also possible to let `toPretty` throw an error if the
limit is exceeded.
- Remove inheritance of `lists.fold` as it isn't used anywhere.
- Inherit `foldl'` for consistency as only `cartesianProductOfSets` explicitly
reference lib.
- Inline `foldr` to generate nested attrs instead of using `listToAttrs` and `tail`.
This allows checking e.g. stdenv.hostPlatform.isGnu, just like isMusl
or isUClibc. It was already possible to check for glibc with
stdenv.hostPlatform.libc == "glibc", but when that doesn't line up
with how every other platform check works, this is apparently
sufficiently non-obvious that we've ended up with stuff like adding
glibc.static if !isMusl, which is obviously wrong.
This regressed in 9c213398b3
The recursiveUpdate gave the platform both gcc.cpu and gcc.arch attrs
instead of only gcc.cpu. This is invalid; gcc configuration fails with:
```
Switch "--with-arch" may not be used with switch "--with-cpu"
```
So we revert to using `//` to retain only gcc.cpu
(which is more specific than the processor arch).
Trying to create a simple flake with input:
```
{
inputs.nixpkgs-lib.url = "github:NixOS/nixpkgs?dir=lib";
outputs = {nixpkgs-lib, ...}: { };
}
```
Fails when trying to evaluate the nixpkgs-lib flake with an error like:
```
error: getting status of '/nix/store/xxxx-source/lib/lib': No such file or directory
(use '--show-trace' to show detailed location information)
```
Allows for distinction of licenses that are unfree overall but do grant the
right to redistribute. Defaults to the freeness of the license.
Note: Many unfree but are redistributable licenses aren't marked as such.
I expect that to be fixed in a distributed manner over time.
Closes https://github.com/NixOS/nixpkgs/pull/97789
Previously, if a derivation without a `drvPath` was handled, an error
would be thrown:
nix-repl> lib.generators.toPretty {} { type = "derivation"; }
error: attribute 'drvPath' missing, at /home/infinisil/src/nixpkgs/lib/generators.nix:251:24
With this commit it doesn't anymore:
nix-repl> lib.generators.toPretty {} { type = "derivation"; }
"<derivation ???>"
This matches what `nix repl` outputs:
nix-repl> { type = "derivation"; }
«derivation ???»
For an option definition that uses `lib.options.mergeEqualOption`
underneath, like `types.anything`, an error is thrown when multiple
functions are assigned, indicating that functions can't be compared for
equivalence:
error: The option `test' has conflicting definition values:
- In `xxx': <function>
- In `xxx': <function>
(use '--show-trace' to show detailed location information)
However, the error message didn't use the correct files. While above
error indicates that both definitions are in the xxx file, that's in
fact not true. Above error was generated with
options.test = lib.mkOption {
type = lib.types.anything;
};
imports = [
{
_file = "yyy";
test = y: y;
}
{
_file = "xxx";
test = x: x;
}
];
With this change, the error uses the correct file locations:
error: The option `test' has conflicting definition values:
- In `xxx': <function>
- In `yyy': <function>
(use '--show-trace' to show detailed location information)
so the underlaying use case of the preceding commit is so
generic, that we gain a lot in reasoning to give it an
appropriate name.
As the comment states:
image media needs to override host config short of mkForce
m68k was recently added for Linux and none, but NetBSD also supports
m68k. Nothing will build yet, but I want to make sure we at least
encode the existence of NetBSD support for every applicable
architecture we support for other operating systems.
In Autoconf, some old NetBSD targets like "i686-unknown-netbsd" are
interpreted as a.out, not elf, and virtually nothing supports it. We
need to specify e.g. "i686-unknown-netbsdelf" to get the right
behaviour.
Newer bootloaders for RISC-V (i.e., OpenSBI + U-Boot) support
flat and compressed kernel images but not vmlinux. Therefore,
let's build "Image" like what we do with aarch64.
Also copy DTBs while we are at it.
This will begin the process of breaking up the `useLLVM` monolith. That
is good in general, but I hope will be good for NetBSD and Darwin in
particular.
Co-authored-by: sterni <sternenseemann@systemli.org>
Stating that CPUs and the isCompatible relation forms a category (or
preorder) is correct but overtly technical. We can state it more
clearly for readers unfamiliar with mathematics while retaining some
keywords to be useful to technical readers.
This PR adds a new aarch64 android toolchain, which leverages the
existing crossSystem infrastructure and LLVM builders to generate a
working toolchain with minimal prebuilt components.
The only thing that is prebuilt is the bionic libc. This is because it
is practically impossible to compile bionic outside of an AOSP tree. I
tried and failed, braver souls may prevail. For now I just grab the
relevant binaries from https://android.googlesource.com/.
I also grab the msm kernel sources from there to generate headers. I've
included a minor patch to the existing kernel-headers derivation in
order to expose an internal function.
Everything else, from binutils up, is using stock code. Many thanks to
@Ericson2314 for his help on this, and for building such a powerful
system in the first place!
One motivation for this is to be able to build a toolchain which will
work on an aarch64 linux machine. To my knowledge, there is no existing
toolchain for an aarch64-linux builder and an aarch64-android target.
When a list is passed to isStorePath this is most likely a mistake and
it is therefore better to just return false. There is one case where
this theoretically makes sense (if a list contains a single element for
which isStorePath elem), but since that case is also probably seldomly
intentional, it may save someone from debbuging unclear evaluation
errors.
I am taking the non-invasive parts of #110914 to hopefully help out with #111988.
In particular:
- Use `lib.makeScopeWithSplicing` to make the `darwin` package set have
a proper `callPackage`.
- Adjust Darwin `stdenv`'s overlays keeping things from the previous
stage to not stick around too much.
- Expose `binutilsNoLibc` / `darwin.binutilsNoLibc` to hopefully get us
closer to a unified LLVM and GCC bootstrap.
Previously, an option of type
attrsOf string
wouldn't throw a deprecation warning, even though the string type is
deprecated. This was because the deprecation warning trigger only looked
at the type of the option itself, not any of its subtypes.
This commit fixes this, causing each of the types deprecationMessages to
trigger for the option. This relies on the subtypes mkOptionType
attribute introduced in 26607a5a2e06653fec453c83d063cdfc4b59185f
In 2d45a62899, the submodule type
description was amended with the freeformType description. This causes
all the modules passed to the submodule to be evaluated once on their
own, without any extra definitions from the config section. This means
that the specified modules need to be valid on their own, without any
undeclared options.
This commit adds a test that evaluates a submodules option description,
which would trigger the above problem for one of the tests, if it were
not fixed by this commit as well.
This is done because the next commit makes option evaluation a bit more
strict, which would also trigger this test failure, even though it's not
related to the change at all.
This will be used to issue deprecation warnings recursively in the next
commit
In addition, this allows easily getting nested types of other options, which
is useful when you want to create an option that aliases a part of
another one.
It's a common pattern in Nixpkgs to want to emit a warning in certain
cases, but not actually change behaviours.
This is often expressed as either
if cond then lib.warn "Don't do that thing" x else x
Or
(if cond then lib.warn "Don't do that thing" else lib.id) x
Neither of which really expresses the intent here, because it looks
like 'x' is being chosen conditionally.
To make this clearer, I introduce a "warnIf" function, which makes it
clear that the only thing being affected by the condition is whether
the warning is generated, not the value being returned.
A subflake that can be indidividually accessed without also providing
an interface to the whole of nixpkgs.
Usage:
inputs.nixpkgs-lib.url = "github:NixOS/nixpkgs?dir=lib"
Since shellPackage actually requires the value to be an attribute set
(i. e. an derivation in this case), we cannot re-use the package.check
type checker since it also allows strings or things that are coercible
to strings as long as they look like store paths.
These are all the architectures supported by Nixpkgs on other
platforms, that are also supported by NetBSD. (So I haven't added
any architectures that are new to Nixpkgs here, even though NetBSD
supports some that we don't have.)
The previous mess was partially grouped by OS, and partially grouped
by architecture, which made it very difficult to know where to add new
entries.
I've chosen to group by OS entirely, because OSes are likely to
maintain exhaustive lists of supported architectures, but it's far
less likely we'd be able to find exhaustive lists of supported OSes
for every architecture.
When in the presence of worktrees, it happens that /commondir has a
trailing slash.
In these circumstances, it can lead to `lib.pathType` being passed paths
like `/foo/bar/.git/`, which in turn lead to
`error: attribute '.git' missing`.
With this change, we now make sure send properly-formatted paths to all
other functions.
This, in particular, fixes running NixOS tests on worktrees created by
libgit2 on my machine. (Worktrees created by git itself appear to not
hit the issue.)
I recently wrote some Nix code where I wrongly set a value to an option
which wasn't an actual option, but an attr-set of options. The mistake I
made can be demonstrated with an expression like this:
{
foo = { lib, pkgs, config, ... }: with lib; {
options.foo.bar.baz = mkOption {
type = types.str;
};
config.foo.bar = 23;
};
}
While it wasn't too hard to find the cause of the mistake for me, it was
necessary to have some practice in reading stack traces from the module
system since the eval-error I got was not very helpful:
error: --- TypeError --------------------------------------------------------- nix-build
at: (323:25) in file: /nix/store/3nm31brdz95pj8gch5gms6xwqh0xx55c-source/lib/modules.nix
322| foldl' (acc: module:
323| acc // (mapAttrs (n: v:
| ^
324| (acc.${n} or []) ++ f module v
value is an integer while a set was expected
(use '--show-trace' to show detailed location information)
I figured that such an error can be fairly confusing for someone who's
new to NixOS, so I decided to catch this case in th `byName` function in
`lib/modules.nix` by checking if the value to map through is an actual
attr-set. If not, a different error will be thrown.
Usually we ensure using the mapAttrs call wrapping the license set that
every license has an associated shortName. A change related to legacy
aliases most likely introduced the removal of the shortName attribute
for all the legacy license names by splitting the set into two sets
connected by a record update operator -- leading to mapAttrs only
affecting the first set.
Since it used to be a valid assumption to have that every license had a
shortName attribute, we reintroduce this attribute for the legacy
aliases as well.
Forcing the module to be builtin breaks 5.10, which wants to compile it as a
module (probably due to dependencies). There doesn't seem to be a need to have
it builtin anymore, so we can just remove the override.
In 9c213398b3 kernelPreferBuiltin was
moved/renamed to linux-kernel.preferBuiltin. However, for
armv7l-hf-multiplatform the new option was written with an uppercase P,
which made the kernel build process ignore it.
This reverts commit d9a7d03da8.
Reason for this is that it actually doesn't migitate the issue on nix
stable for another reason: builtins.tryEval doesn't prevent the error
generated by builtins.functionArgs from halting evaluation:
> builtins.tryEval (builtins.functionArgs builtins.functionArgs)
error: 'functionArgs' requires a function, at (string):1:19
Thus it seems that there is no workaround to make
lib.generators.toPretty work with nix stable and primops since there is
no way to distinguish between primops and lambdas in nix.
An high level example case of this problem occuring can be found below:
nix-repl> lib.generators.toPretty {} (lib.concatStringsSep "\n")
error: 'functionArgs' requires a function, at /home/lukas/src/nix/nixpkgs/lib/trivial.nix:334:42
However this does not happen on other partially applied functions:
nix-repl> lib.generators.toPretty {} (lib.concatMapStringsSep "\n")
"<function>"
The issue, as it turns out is that while builtins are functions,
builtins.functionArgs throws if is passed a builtin or a partially
applied builtin:
nix-repl> lib.generators.toPretty {} builtins.toString
error: 'functionArgs' requires a function, at /home/lukas/src/nix/nixpkgs/lib/trivial.nix:334:42
nix-repl> lib.generators.toPretty {} (builtins.foldl' (a: b: a + b))
error: 'functionArgs' requires a function, at /home/lukas/src/nix/nixpkgs/lib/trivial.nix:334:42
I'm pretty sure this qualifies as a nix bug and should be filed
accordingly, but we can work around it in lib.generators.toPretty by
using tryEval and falling back to {} which functionArgs _should_ return
for builtins.
The nix behavior is inconsistent to say the least:
nix-repl> builtins.functionArgs builtins.functionArgs
error: 'functionArgs' requires a function, at (string):1:1
nix-repl> builtins.typeOf builtins.functionArgs
"lambda"
builtins.functionArgs (a: 1 + a)
{ }
nix-repl> builtins.typeOf (a: 1 + a)
"lambda"
PPC64 supports two ABIs: ELF v1 and v2.
ELFv1 is historically what GCC and most packages expect, but this is
changing because musl outright does not work with ELFv1. So any distro
which uses musl must use ELFv2. Many other platforms are moving to ELFv2
too, such as FreeBSD (as of v13) and Gentoo (as of late 2020).
Since we use musl extensively, let's default to ELFv2.
Nix gives us the power to specify this declaratively for the entire
system, so ELFv1 is not dropped entirely. It can be specified explicitly
in the target config, e.g. "powerpc64-unknown-linux-elfv1". Otherwise the
default is "powerpc64-unknown-linux-elfv2". For musl,
"powerpc64-unknown-linux-musl" must use elfv2 internally to function.
