rec { pcBase = { name = "pc"; uboot = null; kernelHeadersBaseConfig = "defconfig"; kernelBaseConfig = "defconfig"; # Build whatever possible as a module, if not stated in the extra config. kernelAutoModules = true; kernelTarget = "bzImage"; }; pc64 = pcBase // { kernelArch = "x86_64"; }; pc32 = pcBase // { kernelArch = "i386"; }; pc32_simplekernel = pc32 // { kernelAutoModules = false; }; pc64_simplekernel = pc64 // { kernelAutoModules = false; }; pogoplug4 = { name = "pogoplug4"; gcc = { arch = "armv5te"; float = "soft"; }; kernelMajor = "2.6"; kernelHeadersBaseConfig = "multi_v5_defconfig"; kernelBaseConfig = "multi_v5_defconfig"; kernelArch = "arm"; kernelAutoModules = false; kernelExtraConfig = '' # Ubi for the mtd MTD_UBI y UBIFS_FS y UBIFS_FS_XATTR y UBIFS_FS_ADVANCED_COMPR y UBIFS_FS_LZO y UBIFS_FS_ZLIB y UBIFS_FS_DEBUG n ''; kernelMakeFlags = [ "LOADADDR=0x8000" ]; kernelTarget = "uImage"; # TODO reenable once manual-config's config actually builds a .dtb and this is checked to be working #kernelDTB = true; # XXX can be anything non-null, pkgs actually only cares if it is set or not uboot = "pogoplug4"; }; sheevaplug = { name = "sheevaplug"; kernelMajor = "2.6"; kernelHeadersBaseConfig = "multi_v5_defconfig"; kernelBaseConfig = "multi_v5_defconfig"; kernelArch = "arm"; kernelAutoModules = false; kernelExtraConfig = '' BLK_DEV_RAM y BLK_DEV_INITRD y BLK_DEV_CRYPTOLOOP m BLK_DEV_DM m DM_CRYPT m MD y REISERFS_FS m BTRFS_FS m XFS_FS m JFS_FS m EXT4_FS m USB_STORAGE_CYPRESS_ATACB m # mv cesa requires this sw fallback, for mv-sha1 CRYPTO_SHA1 y # Fast crypto CRYPTO_TWOFISH y CRYPTO_TWOFISH_COMMON y CRYPTO_BLOWFISH y CRYPTO_BLOWFISH_COMMON y IP_PNP y IP_PNP_DHCP y NFS_FS y ROOT_NFS y TUN m NFS_V4 y NFS_V4_1 y NFS_FSCACHE y NFSD m NFSD_V2_ACL y NFSD_V3 y NFSD_V3_ACL y NFSD_V4 y NETFILTER y IP_NF_IPTABLES y IP_NF_FILTER y IP_NF_MATCH_ADDRTYPE y IP_NF_TARGET_LOG y IP_NF_MANGLE y IPV6 m VLAN_8021Q m CIFS y CIFS_XATTR y CIFS_POSIX y CIFS_FSCACHE y CIFS_ACL y WATCHDOG y WATCHDOG_CORE y ORION_WATCHDOG m ZRAM m NETCONSOLE m # Disable OABI to have seccomp_filter (required for systemd) # https://github.com/raspberrypi/firmware/issues/651 OABI_COMPAT n # Fail to build DRM n SCSI_ADVANSYS n USB_ISP1362_HCD n SND_SOC n SND_ALI5451 n FB_SAVAGE n SCSI_NSP32 n ATA_SFF n SUNGEM n IRDA n ATM_HE n SCSI_ACARD n BLK_DEV_CMD640_ENHANCED n FUSE_FS m # systemd uses cgroups CGROUPS y # Latencytop LATENCYTOP y # Ubi for the mtd MTD_UBI y UBIFS_FS y UBIFS_FS_XATTR y UBIFS_FS_ADVANCED_COMPR y UBIFS_FS_LZO y UBIFS_FS_ZLIB y UBIFS_FS_DEBUG n # Kdb, for kernel troubles KGDB y KGDB_SERIAL_CONSOLE y KGDB_KDB y ''; kernelMakeFlags = [ "LOADADDR=0x0200000" ]; kernelTarget = "uImage"; uboot = "sheevaplug"; # Only for uboot = uboot : ubootConfig = "sheevaplug_config"; kernelDTB = true; # Beyond 3.10 gcc = { arch = "armv5te"; float = "soft"; }; }; raspberrypi = { name = "raspberrypi"; kernelMajor = "2.6"; kernelHeadersBaseConfig = "bcm2835_defconfig"; kernelBaseConfig = "bcmrpi_defconfig"; kernelDTB = true; kernelArch = "arm"; kernelAutoModules = false; kernelExtraConfig = '' BLK_DEV_RAM y BLK_DEV_INITRD y BLK_DEV_CRYPTOLOOP m BLK_DEV_DM m DM_CRYPT m MD y REISERFS_FS m BTRFS_FS y XFS_FS m JFS_FS y EXT4_FS y IP_PNP y IP_PNP_DHCP y NFS_FS y ROOT_NFS y TUN m NFS_V4 y NFS_V4_1 y NFS_FSCACHE y NFSD m NFSD_V2_ACL y NFSD_V3 y NFSD_V3_ACL y NFSD_V4 y NETFILTER y IP_NF_IPTABLES y IP_NF_FILTER y IP_NF_MATCH_ADDRTYPE y IP_NF_TARGET_LOG y IP_NF_MANGLE y IPV6 m VLAN_8021Q m CIFS y CIFS_XATTR y CIFS_POSIX y CIFS_FSCACHE y CIFS_ACL y ZRAM m # Disable OABI to have seccomp_filter (required for systemd) # https://github.com/raspberrypi/firmware/issues/651 OABI_COMPAT n # Fail to build DRM n SCSI_ADVANSYS n USB_ISP1362_HCD n SND_SOC n SND_ALI5451 n FB_SAVAGE n SCSI_NSP32 n ATA_SFF n SUNGEM n IRDA n ATM_HE n SCSI_ACARD n BLK_DEV_CMD640_ENHANCED n FUSE_FS m # nixos mounts some cgroup CGROUPS y # Latencytop LATENCYTOP y ''; kernelTarget = "zImage"; uboot = null; gcc = { arch = "armv6"; fpu = "vfp"; float = "hard"; }; }; raspberrypi2 = armv7l-hf-multiplatform // { name = "raspberrypi2"; kernelBaseConfig = "bcm2709_defconfig"; kernelDTB = true; kernelAutoModules = false; kernelExtraConfig = '' BLK_DEV_RAM y BLK_DEV_INITRD y BLK_DEV_CRYPTOLOOP m BLK_DEV_DM m DM_CRYPT m MD y REISERFS_FS m BTRFS_FS y XFS_FS m JFS_FS y EXT4_FS y IP_PNP y IP_PNP_DHCP y NFS_FS y ROOT_NFS y TUN m NFS_V4 y NFS_V4_1 y NFS_FSCACHE y NFSD m NFSD_V2_ACL y NFSD_V3 y NFSD_V3_ACL y NFSD_V4 y NETFILTER y IP_NF_IPTABLES y IP_NF_FILTER y IP_NF_MATCH_ADDRTYPE y IP_NF_TARGET_LOG y IP_NF_MANGLE y IPV6 m VLAN_8021Q m CIFS y CIFS_XATTR y CIFS_POSIX y CIFS_FSCACHE y CIFS_ACL y ZRAM m # Disable OABI to have seccomp_filter (required for systemd) # https://github.com/raspberrypi/firmware/issues/651 OABI_COMPAT n # Fail to build DRM n SCSI_ADVANSYS n USB_ISP1362_HCD n SND_SOC n SND_ALI5451 n FB_SAVAGE n SCSI_NSP32 n ATA_SFF n SUNGEM n IRDA n ATM_HE n SCSI_ACARD n BLK_DEV_CMD640_ENHANCED n FUSE_FS m # nixos mounts some cgroup CGROUPS y # Latencytop LATENCYTOP y # Disable the common config Xen, it doesn't build on ARM XEN? n ''; kernelTarget = "zImage"; uboot = null; }; scaleway-c1 = armv7l-hf-multiplatform // { gcc = { cpu = "cortex-a9"; fpu = "vfpv3"; float = "hard"; }; }; utilite = { name = "utilite"; kernelMajor = "2.6"; kernelHeadersBaseConfig = "multi_v7_defconfig"; kernelBaseConfig = "multi_v7_defconfig"; kernelArch = "arm"; kernelAutoModules = false; kernelExtraConfig = '' # Ubi for the mtd MTD_UBI y UBIFS_FS y UBIFS_FS_XATTR y UBIFS_FS_ADVANCED_COMPR y UBIFS_FS_LZO y UBIFS_FS_ZLIB y UBIFS_FS_DEBUG n ''; kernelMakeFlags = [ "LOADADDR=0x10800000" ]; kernelTarget = "uImage"; kernelDTB = true; uboot = true; #XXX: any non-null value here is needed so that mkimage is present to build kernelTarget uImage gcc = { cpu = "cortex-a9"; fpu = "neon"; float = "hard"; }; }; guruplug = sheevaplug // { # Define `CONFIG_MACH_GURUPLUG' (see # ) # and other GuruPlug-specific things. Requires the `guruplug-defconfig' # patch. kernelBaseConfig = "guruplug_defconfig"; #kernelHeadersBaseConfig = "guruplug_defconfig"; }; fuloong2f_n32 = { name = "fuloong2f_n32"; kernelMajor = "2.6"; kernelHeadersBaseConfig = "fuloong2e_defconfig"; kernelBaseConfig = "lemote2f_defconfig"; kernelArch = "mips"; kernelAutoModules = false; kernelExtraConfig = '' MIGRATION n COMPACTION n # nixos mounts some cgroup CGROUPS y BLK_DEV_RAM y BLK_DEV_INITRD y BLK_DEV_CRYPTOLOOP m BLK_DEV_DM m DM_CRYPT m MD y REISERFS_FS m EXT4_FS m USB_STORAGE_CYPRESS_ATACB m IP_PNP y IP_PNP_DHCP y IP_PNP_BOOTP y NFS_FS y ROOT_NFS y TUN m NFS_V4 y NFS_V4_1 y NFS_FSCACHE y NFSD m NFSD_V2_ACL y NFSD_V3 y NFSD_V3_ACL y NFSD_V4 y # Fail to build DRM n SCSI_ADVANSYS n USB_ISP1362_HCD n SND_SOC n SND_ALI5451 n FB_SAVAGE n SCSI_NSP32 n ATA_SFF n SUNGEM n IRDA n ATM_HE n SCSI_ACARD n BLK_DEV_CMD640_ENHANCED n FUSE_FS m # Needed for udev >= 150 SYSFS_DEPRECATED_V2 n VGA_CONSOLE n VT_HW_CONSOLE_BINDING y SERIAL_8250_CONSOLE y FRAMEBUFFER_CONSOLE y EXT2_FS y EXT3_FS y REISERFS_FS y MAGIC_SYSRQ y # The kernel doesn't boot at all, with FTRACE FTRACE n ''; kernelTarget = "vmlinux"; uboot = null; gcc.arch = "loongson2f"; }; beaglebone = armv7l-hf-multiplatform // { name = "beaglebone"; kernelBaseConfig = "omap2plus_defconfig"; kernelAutoModules = false; kernelExtraConfig = ""; # TBD kernel config kernelTarget = "zImage"; uboot = null; }; armv7l-hf-multiplatform = { name = "armv7l-hf-multiplatform"; kernelMajor = "2.6"; # Using "2.6" enables 2.6 kernel syscalls in glibc. kernelHeadersBaseConfig = "multi_v7_defconfig"; kernelBaseConfig = "multi_v7_defconfig"; kernelArch = "arm"; kernelDTB = true; kernelAutoModules = true; kernelPreferBuiltin = true; uboot = null; kernelTarget = "zImage"; kernelExtraConfig = '' # Fix broken sunxi-sid nvmem driver. TI_CPTS y # Hangs ODROID-XU4 ARM_BIG_LITTLE_CPUIDLE n ''; gcc = { # Some table about fpu flags: # http://community.arm.com/servlet/JiveServlet/showImage/38-1981-3827/blogentry-103749-004812900+1365712953_thumb.png # Cortex-A5: -mfpu=neon-fp16 # Cortex-A7 (rpi2): -mfpu=neon-vfpv4 # Cortex-A8 (beaglebone): -mfpu=neon # Cortex-A9: -mfpu=neon-fp16 # Cortex-A15: -mfpu=neon-vfpv4 # More about FPU: # https://wiki.debian.org/ArmHardFloatPort/VfpComparison # vfpv3-d16 is what Debian uses and seems to be the best compromise: NEON is not supported in e.g. Scaleway or Tegra 2, # and the above page suggests NEON is only an improvement with hand-written assembly. arch = "armv7-a"; fpu = "vfpv3-d16"; float = "hard"; # For Raspberry Pi the 2 the best would be: # cpu = "cortex-a7"; # fpu = "neon-vfpv4"; }; }; aarch64-multiplatform = { name = "aarch64-multiplatform"; kernelMajor = "2.6"; # Using "2.6" enables 2.6 kernel syscalls in glibc. kernelHeadersBaseConfig = "defconfig"; kernelBaseConfig = "defconfig"; kernelArch = "arm64"; kernelDTB = true; kernelAutoModules = true; kernelPreferBuiltin = true; kernelExtraConfig = '' # Raspberry Pi 3 stuff. Not needed for kernels >= 4.10. ARCH_BCM2835 y BCM2835_MBOX y BCM2835_WDT y RASPBERRYPI_FIRMWARE y RASPBERRYPI_POWER y SERIAL_8250_BCM2835AUX y SERIAL_8250_EXTENDED y SERIAL_8250_SHARE_IRQ y # Cavium ThunderX stuff. PCI_HOST_THUNDER_ECAM y ''; uboot = null; kernelTarget = "Image"; gcc = { arch = "armv8-a"; }; }; selectBySystem = system: { "i686-linux" = pc32; "x86_64-linux" = pc64; "armv5tel-linux" = sheevaplug; "armv6l-linux" = raspberrypi; "armv7l-linux" = armv7l-hf-multiplatform; "aarch64-linux" = aarch64-multiplatform; "mips64el-linux" = fuloong2f_n32; }.${system} or pcBase; }